HỖ TRỢ KHÁCH HÀNG

Bộ hiển thị momen quay - TM500

Giá: Liên hệ

Bộ hiển thị TM500 dùng cho cảm biến momen quay UTM II, UTMV.
Nhà sản xuất: Unipulse - Nhật Bản.

Tài liệu: TM500 torque monitor.pdf
* Bộ hiển thị mômen dùng cho cảm biến UTM II/UTMV
* Phù hợp với các ứng dụng quay tốc độ chậm tác động trực tiếp
* Dữ liệu được lưu vào thẻ SD
* Dễ dang kết nối với cảm biến UTM II/UTMV với một sợi cáp.
* Nguồn vận hành có thể cấp cho cảm biến UTM II/UTMV (cũng như bộ mã hóa 
   vòng quay mở rộng).
* Giới hạn trên/dưới của việc thay đổi vị trí đối với mômen khởi tạo có thể được so 
   sánh.
* Việc kiểm tra có thể được lặp liên tục.
■ Các ứng dụng mẫu:
*Giám sát mômen bộ vặn vít

TM500 application example




TM500 application example
TM500 application example

TM500 application example
TM500 application example
ANALOG SECTION
Torque input-5~+5V Input impedance:1MΩ or more
AccuracyNon-linearity:Within 0.02%FS±1digit
Zero drift: Within 0.2mV/℃ RTI
Gain drift : Within 0.01%/℃
Analog filterLow pass filter(-6dB/oct.)Select from 30, 100, 300, 1kHz
A/D converter・ Rate :4000times/sec
・ Resolution:24bit(binary) Approx. 1/30000 with respect to 5V
Monitor outputOutput level :Input voltage cuff (For test point)
Pulse input
(Open collector)
Maximum input frequency :50kHz
Internal counting range :Approx. 1000000
 
DISPLAY SECTION
Display unit3.5 inch TFT color LCD
 
SETTING SECTION
Setting methodSetting by analog type touch panel operation
Preservation of set valuesNOV RAM (nonvolatile RAM), Lithium-battery-backed-up C-MOS RAM
 
EXTERNAL I/O SIGNAL
External output(15 )Hold result(Load, DPM)/Overload/Wave result/Complete/RUN/Load OK/DPM OK/SD OK
External input(12 )Load Digital Zero/DPM Positioning/Start/Stop/Hold/Reset/Backlight On/Prohibit Touch Panel/Work change
 
INTERFACE
InterfaceRS-232C
 
GENERAL SPECIFICATIONS
Power supplyDC24V(±15%)
Power consumption20W max
Operating conditionsTemperature:Operation -10 ~+40℃ Storage -20 ~+60℃
Humidity:85%RH or less ( non-condensing )
Dimension96(W)×96(H)×117.3(D)mm(Projections excluded)
WeightApprox. 1.0kg
CE marking certificationEMC directives  EN61326-1
 
ATTACHMENT
 Operation manual・・・・・・1
External input/output connector・・・・・・1
Cable for UTMⅡ/UTMV connection (2m)・・・・・・1
Cable for UTMⅡrotary encoder connection (2m)・・・・・・1
SD card (1GB)(with SDC option)・・・・・・1

Option

ProductDescription
SDCSD card slot (Approx. 80 waveforms can be preserved by 1MB., SDHC and SDXC are not supported.) 
All indicated values and all comparison waveforms can be saved and restored. 
Measured waveforms and judgment points can be saved automatically.
 

 

 

Optional accessories

ProductDescription
DTC1Case for TM500 (with AC power supply)
SD1G1GByte card
SD2G2GByte card
SD-ADPSD card adapter
CA81-232XminiDIN-D-Sub9p cross cable 1.5m
CATM51-MCable for UTMⅡ/UTMV connection 5m
CATM(R)51-MCable for UTMⅡrotary encoder connection 5m
CN52FCN series I/O connector (with cover)
CN57FCN series I/O connector (with diagonal cover)
CN60Circular DIN 8p connector for RS-232C
CN90Waterproof plastic connector for UTMⅡ/UTMV connection
CN91Waterproof plastic connector for UTMⅡrotary encoder connection
GMP96x96Rubber packing
 

Option

ProductDescription
SDCSD card slot (Approx. 80 waveforms can be preserved by 1MB., SDHC and SDXC are not supported.) 
All indicated values and all comparison waveforms can be saved and restored. 
Measured waveforms and judgment points can be saved automatically.
 


 

Optional accessories

ProductDescription
DTC1Case for TM500 (with AC power supply)
SD1G1GByte card
SD2G2GByte card
SD-ADPSD card adapter
CA81-232XminiDIN-D-Sub9p cross cable 1.5m
CATM51-MCable for UTMⅡ/UTMV connection 5m
CATM(R)51-MCable for UTMⅡrotary encoder connection 5m
CN52FCN series I/O connector (with cover)
CN57FCN series I/O connector (with diagonal cover)
CN60Circular DIN 8p connector for RS-232C
CN90Waterproof plastic connector for UTMⅡ/UTMV connection
CN91Waterproof plastic connector for UTMⅡrotary encoder connection
GMP96x96Rubber packing