| Analog section | |
| Excitation voltage | DC5V±5% Output current: 90mADC2.5V±5% Output current: 45mA(depending on settings)Ratiometric method (up to six 350Ω load cells can be connected in parallel) |
|---|---|
| Signal input range | -2.5 to 5.1mV/V |
| Zero adjustment range | Automatic adjustment by digital processing: -0.5 to 2.0mV/V |
| Gain adjustment range | Automatic adjustment by digital processing: 0.01 to 3.0mV/V |
| Linearization function | Up to three additional points between zero and span points can be defined. |
| Minimum input sensitivity | 0.15μV/count |
| Accuracy | Non-linearity: within 0.01%FSZero drift: 0.0002%FS/℃ TypGain drift: 1ppm/℃ Typ |
| Filter | Digital low-pass filter: 0.1 to 300 HzMoving average filter: OFF, 2 to 512 times |
| A/D converter | Rate: 1200 times/sec.Resolution: 24 bit(binary) |
| Display section | |
| Display unit | 8mm character height, 7-segment green LED numeric display |
|---|---|
| Indicated value | UP to 6 digits |
| Refresh rate | Selectable from 1, 3, 6, 13, or 25 times/sec. |
| External signal | |
| External output(5) | Transistor open collector output.Vceo=30V,Ic=50mA |
|---|---|
| External input(3) | Selectable inputs.Either contact type (relay, switch etc.) or non-contact type (transistor, photocoupler etc.. ) can be connected.ON when short-circuited with COM.* The external power supply (DC24V) needs to be prepared by user. |
| Interface | |
| USB | USB interface |
|---|---|
| 485 | RS-485 communication interface (select either Modbus-RTU or UNI format) |
| DAC | D/A converter (select either voltage or current output) |
| General performance | |
| Operating voltage | DC24V (±15%) |
|---|---|
| Power consumption | 3W typ |
| Operation condition | Operating temperature range: -10℃ to +50℃.Storage temperature range: -20℃ to +85℃Humidity: 85%RH or less (non-condensing) |
| Dimensions | 34(W)×88(H)×91(D)mm (not including protrusions) |
| Weight | Approx. 210g |
| CE marking certification | EMC Directives EN61326-1 |
.png)
