Air-hydro unit smc cc

AIR-HYDRO UNIT SMC CC

By converting air pressure into hydraulic pressure, the same functions of a hydraulic unit can be obtained while using pneumatic equipment.

Converting pneumatic pressure to hydraulic pressure (equivalent pressure) solves cylinder problems occurring due to the compression characteristics of pneumatic pressure.
Integrate a converter and a valve unit in a compact configuration.
Wide range of series in terms of converter capacity and valve unit flow rate control capability.
Operation at a piston speed of 180 mm/sec with a size ø80 cylinder bore. (Operating pressure: 0.5 MPa, Load mass: No load, Piping: I.D. ø19 mm x length 1 m)

Constant-speed operation is possible with load fluctuations.
Solves the problems of sticking and slipping associated with low-speed operation.
Intermediate stopping and skip movement possible.
Suitable for slow operation of a rotary actuator.
Possible to select 4 types of valve units for applications.
Possible to connect a converter and a valve unit independently.