Makes design and assembly easier because magnetic scale is not required
Enables compact machine designs.
| Pin assignment | Pin signal | |
 |
Encoder | Extension cable (output side) |
| A=+5V | 2=SG | |
| B=PA | 5=/PB | |
| C=/PA | 6=/PA | |
| D=SG | 7=+5V | |
| E=PB | 8=+5V | |
| F=/PB | 9=SG | |
| G= - | 13=PB | |
| H=FG | 14=PA | |
| Encoder | Incremental magnetic encoder |
| Resolution (μm): | 1 / 5 / 10 |
| Positioning repeatability | ± Resolution or less |
| Power supply | 5V ± 5% |
| Output | Incremental A-B phase differential output EIA-422 line driver |
| Encoder head protection rating |
IP67 |
| Cable length (mm) | 500 (extension cables are available) |
| Standard compliance | CE |
| Model | Features | Size |
| Model SHS-LE-C | The flange of the Linear Motion block has tapped holes. Can be mounted from the top or the bottom. Used in places where the table cannot have through holes for mounting bolts. |
20, 25, 30, 35, 45 |
| Model SHS-LE-V | With this type, the Linear Motion block has a smaller width (W) and tapped holes. Used in places where the space for table width is limited. | 20, 25, 30, 35, 45 |
| Model SHS-LE-R | The Linear Motion block has a smaller width (W), and the mounting holes are tapped. It succeeds the height dimension of full-ball type Linear Motion Guide HSR-R. |
25, 30, 35, 45 |
| Model SHS-LE-LC | The Linear Motion block has the same cross-sectional shape as model SHS-LE-C, but has a longer overall Linear Motion block length (L) and a greater rated load. | 20, 25, 30, 35, 45 |
| Model SHS-LE-LV | The Linear Motion block has the same cross-sectional shape as model SHS-LE-V, but has a longer overall Linear Motion block length (L) and a greater rated load. | 20, 25, 30, 35, 45 |
| Model SHS-LE-LR | The Linear Motion block has the same cross-sectional shape as model SHS-LE-R, but has a longer overall Linear Motion block length (L) and a greater rated load. | 25, 30, 35, 45 |
