Low gwp refrigerant chiller hrrf series

LOW GWP REFRIGERANT CHILLER HRRF SERIES

The HRRF Series is a low GWP refrigerant chiller designed to reduce environmental impact and meet global cooling regulations.

LOW GWP REFRIGERANT CHILLER HRRF SERIES

Low GWP refrigerant chiller.
Environmentally friendly R454C as refrigerant (Not available for air transport).
Operable without the need to remove the unit from the rack.
Front access: Simple to control, service, and maintain with all filters and drainage accessible via the front panel.
Space saving: Multiple chillers can be mounted to a 19-inch rack.
Cooling capacity: 1.2/1.8 kW (60 Hz).
Temperature stability: ±0.1°C.
Power supply: Single-phase 200 to 230 VAC (50/60 Hz).

download Request a quotation

Technical Information

Model		Air-cooled Refrigeration		Water-cooled Refrigeration
		HRRF012-A-20	HRRF018-A-20	HRRF012-A-20	HRRF018-A-20
Cooling method		Air-cooled refrigeration		Water-cooled refrigeration
Refrigerant		R454C (HFO/HFC, GWP: 146)
Refrigerant charge [kg]		0.30		0.22
Weight [kg]		45
Control method		PID control
Ambient temperature/Humidity/Altitude		Temperature: 5 to 40°C, Humidity: 30 to 70%, Altitude: less than 3000 m
Circulating fluid system	Circulating fluid	Tap water, 15% ethylene glycol aqueous solution
	Set temperature range [°C]	5 to 35
	Cooling capacity (50/60 Hz) [W]	1000/1200	1600/1800	1000/1200	1600/1800
	Heating capacity (50/60 Hz) [W]	450/500
	Temperature stability [°C]	±0.1
	Pump capacity (50/60 Hz) [MPa]	0.13 (at 7 L/min)/0.18 (at 7 L/min) For Option T: 0.42 (at 10 L/min)/0.4 (at 14 L/min) For Option MT: 0.32 (at 10 L/min)/0.32 (at 14 L/min) For Option T1: 0.28 (at 10 L/min)/0.28 (at 10 L/min)
	Rated flow (50/60 Hz) [L/min]	7/7 For Options T, MT: 10/14, For Option T1: 10/10
	Flow display range [L/min]	2 to 16
	Electric conductivity display range [μS/cm]	0.1 to 48 (Only for Option DM)
	Electric conductivity setting range [μS/cm]	0.5 to 45 (Only for Option DM)
	Particle filter nominal filtration rating [μm]	5
	Bypass valve	Installed
	Tank capacity [L]	Approx. 4
	Outlet, Return port size	Rc1/2
	Drain port size	Rc1/4, With cap
	Leakage protection	Drain pan (With water leakage sensor)
	Fluid contact material	Stainless steel, Copper (Heat exchanger brazing), Brass∗16, SiC, Alumina ceramic, Carbon, PP, PE, POM, PA, FKM, EPDM, PVC, PPS, AS, Fluoropolymer, Ion exchange resin
Facility water system	Temperature range [°C]	-		5 to 40
	Pressure range [MPa]			0.3 to 0.5
	Required flow rate (50/60 Hz) [L/min]			8	12
	Inlet-outlet pressure differential of facility water [MPa]			0.3 or more
	Port size			Rc3/8
	Fluid contact material			Stainless steel, Copper (Heat exchanger brazing), Bronze, Brass, NBR, EPDM
Electrical system	Power supply	Single-phase 200 to 230 VAC, 50/60 Hz, Allowable voltage range ±10%
	Circuit protector [A]	10 For Options T, MT, T1: 15
	Applicable earth leakage breaker capacity	Rated current: 10 A For Options T, MT, T1: 15 A Sensitivity current: 30 mA
	Cable quantity x Size (Including grounding cable)	3 cores x 14 AWG (3 cores x 2.0 mm²)