| Model | PFUW760 | PFUW711 | ||
| Fluid |
Applicable fluid |
General liquids (Water, Oil, Chemical liquids, etc.) | ||
| Fluid temperature range | 0 to 90°C (No freezing or condensation) | |||
| Flow | Rated flow range | 0 to 60 L/min (Flow under 0.6 L/min is displayed as 0.0 L/min)∗3 |
0 to 100 L/min (Flow under 1.0 L/min is displayed as 0.0 L/min) |
|
| Detection method | Ultrasonic method (Propagation time difference method) | |||
| Accuracy | Flow rate accuracy | ±3.0% F.S. | ||
| Analog output accuracy | ±3.0% F.S. | |||
| Repeatability | ±2.0% F.S. | |||
| Temperature characteristics | ±5.0% F.S. (25°C standard) | |||
| Analog output |
Output type | Voltage output: Select from 1 to 5 V or 0 to 10 V, Current output: 4 to 20 mA |
||
| Impedance | Voltage output |
Output impedance: Approx. 1 kΩ |
||
| Current output | Max. load impedance: 600 Ω at power supply voltage of 24 V | |||
| External input |
Input type | Input voltage: NPN setting: 0.4 V or less (Reed or Solid state) PNP setting DC (+) -1 V or more |
||
| Input mode | Select from accumulated value external reset, peak/ bottom reset, or zero-clear. |
|||
| Input time | 30 ms or more | |||
| Switch output |
Output type | Select from NPN or PNP open collector. | ||
| Output mode | Select from hysteresis, window comparator, accumulated output, accumulated pulse output, error output, or switch output OFF modes. |
|||
| Electrical | Power supply voltage | 18 to 30 VDC | ||
| Current consumption | 85 mA or less | |||
| Display | Display mode | Main screen: Instantaneous flow rate display Sub screen: Select from set flow rate display, accumulated flow rate display, etc. |
||
| Display method | LCD, Display color: White/Orange/ Red/Green/Blue, 90/180/270° rotatable, Display values updated 10 times per second |
|||
