FS10 will make your PC a load cell monitor

What is FS10?

FS10 is a load cell monitor with a built-in amplifier.

FS10 is a digitizer module for strain gauge-type sensors for force, pressure, and displacement measurements. A very accurate measurement can be achieved with the high sampling rate of 1200sps. This product is ideal for test and experiment applications.

As it is powered by USB, what you need to do is to just connect it to PC with a single cable. FS10 allows you to monitor and log load data with little difficulty.

With its compact and palm-size body, it is very convenient to carry.

You can plug the FS10 into your computer and monitor the force data right on your PC or laptop!

We also provide free dedicated PC software. It is even convenient if you use a terminal block to connect it to load cell. CN79 is an optional connector that makes it easy to connect the unit with load cell cables.

Advantages of FS10:

1. High-speed digital processing: 1200 times/sec.

2. Monitoring the waveform of force in real-time.

You can see if the real-time value is within the high/low, and the data of waveform can be saved on PC as well.

Data displayed on PC

3. Easy to perform the initial setup and calibration

By using the software, settings can be saved and edited on PC, and calibration can be performed as well.

Setup & calibration

4. Can record 10000 data!

Up to 10000 measurement and status data can be recorded. With the OK/NG count function, you can review results of pass/fail tests as well.

Data logging

The module is powered by USB, and it can supply excitation voltage to the connected load cell as well. The dedicated PC software for the device is available