Spin and Push for easy control 

The motor and driver can be easily connected

Energy-saving:

Loss 26% reduction with 1.3 times output 

Kiểu kết hợp đầu bánh răng mới:

New gearhead combination type: With the gearhead's boss section and cut on the installation surface, the installation accuracy with the equipment has been improved. It also achieved lower noise, compared with the conventional model. Since the motor and gearhead come in a preassembled combination type, it can easily be attached to the equipment. The motor, driver, and gearhead comes together, saving time and effort for procurement.

Additional Feature for 200/400 W:

Compact, High Output Power and High Efficiency Design

Wide Range Speed Control (Speed Ratio 50:1), maximum speed of 4000r/min  

Additional Function 

• The front panel operation can be set to Disabled. For the motor to be run by external signals, the switch operation on the front panel can be set to "Disabled". 
• The number of I/O input signals has been increased from 3 to 5. BMU Series has satisfied customers' needs, such as "at the time of 4-speed operation, the rotation direction needs to be externally switched" and "an alarm needs to be canceled without turning off the main power". 

List of Product - Brushless motors BMU series

Types	Parallel Shaft Gearhead		Legged Gearhead	Hypoid Right-Angle Gearhead	Round Shaft
	GFV Gearhead	JV Gearhead	JB Gearhead	JH Gearhead	Round Shaft/Cable Type
Product Appearance
Characteristic	Stainless steel shaft	High gear Ratio ~ 1/450 Stainless steel shaft	Integrated leg attachment High rigidity High gear ratio ~ 1/1200	Space saving, cost saving High Strength Stainless steel shaft	Stainless steel shaft
Output	30W ~ 400W	200W	200W	60W, 120W, 200W	30W ~ 400W
Protection grade	IP66	IP66	IP44	IP66	IP40
Gear Ratio	5 ~ 200	300, 450	5 ~ 1200	5 ~ 200	1~200
Permissible radial load / Permissible axial load	1400N / 400N	3123N / 480N	3672N / 577N	2405N / 550N	170N / Half of motor mass or less
Permissible Torque	~ 70 N.m	~ 198 N.m	~ 518 N.m	~ 82.8 N.m	~ 1.27 N.m