Technical Information

Analog section
Excitation voltage DC5V±5% Output current: 90mA
DC2.5V±5% Output current: 45mA
Ratiometric method (Up to 6 350Ω load cells can be connected in parallel)
Signal input range -2.5 to 5.1mV/V
Zero adjustment range Automatic adjustment by digital processing -0.5 to 2.0mV/V
Span adjustment range Automatic adjustment by digital processing 0.01 to 3.0mV/V
Linearization function Up to three point multi-point calibration is possible
Min. input sensitivity 0.15μV/count
Accuracy Non-linearity: within 0.01%FSZero drift: 0.0002%FS/℃ TypGain drift: 1ppm/℃ Typ
Filter Digital low-pass filter: 0.1 to 300 HzMoving average filter: OFF, 2 to 512 times
A/D converter Speed: 1200 times/sec.Resolution: 24bit binary

 

Display section
Display unit Character height 8mm, Numerical display by 7-segment green LED
Display value Up to 6 digits
Display frequency Selectable from 1, 3, 6, 13, 25 times/sec.
Status display RUN, ERR

 

External signal
Output signal(5) Selectable/configurableTransistor’s open collector outputVceo=30V, Ic=50mA
Input signal(3) Selectable/configurableInput is ON when shorted to COM terminal by contact (relay switch, etc.)or non contact (transistor, open collector, etc.).* DC24V external power supply is required.

 

Interface
USB USB interface
ECT EtherCAT interface

 

General performance
Power supply voltage DC24V (±15%)
Power consumption 4W typ
Operating conditions Temperature: Operating temperature range: -10℃ to +50℃, torage temperature range: -20℃ to +85℃Humidity: 85%RH or less (non-condensing)
Dimensions 34(W)×88(H)×91(D)mm (Projections excluded)
Weight Approx. 230g
CE marking certification EMC Directives EN61326-1