| Analog section | |
| Excitation voltage | DC5V±5% Output current: 90mADC2.5V±5% Output current: 45mARatiometric method (Up to 6 350Ω load cells can be connected in parallel) |
|---|---|
| Signal input range | -2.5 to 5.1mV/V |
| Zero adjustment range | Automatic adjustment by digital processing -0.5 to 2.0mV/V |
| Span adjustment range | Automatic adjustment by digital processing 0.01 to 3.0mV/V |
| Linearization function | Up to three point multi-point calibration is possible |
| Min. input sensitivity | 0.15μV/count |
| Accuracy | Non-linearity: within 0.01%FSZero drift: 0.0002%FS/℃ TypGain drift: 1ppm/℃ Typ |
| Filter | Digital low-pass filter: 0.1 to 300 HzMoving average filter: OFF, 2 to 512 times |
| A/D converter | Speed: 1200 times/sec.Resolution: 24bit binary |
| Display section | |
| Display unit | Character height 8mm, Numerical display by 7-segment green LED |
|---|---|
| Display value | Up to 6 digits |
| Display frequency | Selectable from 3, 6, 13, 25 times/sec. |
| Status display | MS, NS |
| External signal | |
| Output signal(5) | Selectable/configurableTransistor’s open collector outputVceo=30V, Ic=50mA |
|---|---|
| Input signal(3) | Selectable/configurableInput is ON when shorted to COM terminal by contact (relay switch, etc.)or non contact (transistor, open collector, etc.).* DC24V external power supply is required. |
| Interface | |
| USB | USB interface |
|---|---|
| EIP | EtherNet/IP interface |
| General performance | |
| Power supply voltage | DC24V (±15%) |
|---|---|
| Power consumption | 4W typ |
| Operating conditions | Temperature: Operating temperature range: -10℃ to +50℃, Storage temperature range: -20℃ to +85℃Humidity: 85%RH or less (non-condensing) |
| Dimensions | 34(W)×88(H)×91(D)mm (Projections excluded) |
| Weight | Approx. 230g |
| CE marking certification | EMC Directives EN61326-1 |
.png)
