| Specifications | MINIMAX IIIS |
|---|---|
| Power requirement/ Frequency | Single phase Triple phase AC 100V, 50/60Hz |
| Contents | 3KVA |
| Working ambient temp. and environment | 0 to 40 degree (No condensation or corrosive gas/no excessive dust) |
| Air requirement | 0.4 to 0.5MPa (4 to 5kgf/cm2) as dry air |
| Operating method, No. of control axes | PTP control/4-axis in total (Synchronous 3 axes linear, circular interpolation control function) |
| Drive system | AC servo motor, Ball screw drive |
| Axis | Stroke/ Positioning repeatability/ Max. speed |
| X-axis | 300mm or 400mmm/ ± 0.01mm/ 1200mm/s |
| Y-axis | 300mm/ ±0.02mm/ 800mm/s |
| Z-axis | 100mm/ ±0.01mm/ 300mm/s |
| R-axis | 360°/ ±0.2°/ 600°/s |
| No. of program | 48 |
| Data storage capacity | Total Program steps : 6,000 steps Point : 3,000 points (some are used for system) |
| Teaching system | Direct teaching by MDI and Jog |
| Input Exclusive use General |
Start, Stop, Emergency, Light curtain, Door switch 10 points |
| Output Exclusive use General |
Under operation, Solder errors, Signal tower (Red, Yellow and Green), Buzzer10 points |
| Soldering conditions | 99 blocks in free program method |
| Outside dimensions (WxDxH) | 593mm x 715mm x 813mm |
| Weight | 53kg |
